- Best Sellers
- 12 MP
- Featured Items
- Mega Pixel
- Viewing Area
- Radiology Displays
- Surgical Displays
- Color Medical Monitors
- Monochrome Medical Monitors
- BARCO Monitors
- EIZO Monitors
- JVC Monitors
- LG Monitors
- NEC Monitors
- Optik View Monitors
- TOTOKU Monitors
- PACS Workstations
- Patient Monitor LCDs
- CRT Replacements
- Ultrasound Machines
- Previous Products
NEW! EIZO MS236WT 2MP 23'' Multitouch
Barco Single Head Nio 5MP LED - MDNG-5221 / K9602730
NEW! Barco 21" 2MP Clinical Review Display MDRC-2321 SNIB - MDRC2321 / K9350053
Barco Coronis MDCC-6530 6MP Dual Head Color LED Fusion with MXRT-8700 Video Card - MDCC-6530 / K9602993
NEW! 2MP Eonis 21
Single Head 2MP Totoku 21.3 – MS23i2-SH-Quadro 2000D
Next-generation interface “Displayport.”
– Switching function between luminance and gamma
– Advanced display quality control
– Uniformity equalizer to minimize luminance and color unevenness across the screen
– Hardware pivot function for fast drawing vertically
– AR-coated models to provide accurate image reproduction
– Built-in and energy- saving power supply
Replaced with New Product
Special AR Coating for Film-like Black and Improved Sharpness
TOTOKU’s new special AR coating technology addresses properties of focus, noise reduction, contrast, and viewing angle achieving film-like black and accurate reproduction of images. (Patent pending)
Luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.
Simultaneous display of 2048 shades of gray
Combined with a viewer software, 2048 shades of grapy (11 bit) can be simultaneously displayed. It realizes smoother grayscale display required for medical image displays.
*A viewer software that supports TOTOKU’s multi-shade display system is required for 2048 shades of gray simultaneous display.
*1276 shades of gray are simultaneously displayable by the Independent Sub-pixel Drive technology.
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
* Optional PM Medivisor software is required.
Next Generation Interface – DisplayPort
In addition to a DVI port, each i2 series display includes a new digital display interface, “DisplayPort”. When using the DisplayPort, up to 1024 or 10-bit shades of gray are simultaneously displayed. This enables smooth and accurate display of subtle dierences in shades of gray. Additionally, 1073.74million colors (10-bit in each R, G, B) are simultaneously displayed on our color model.
*Customized viewer software and graphics card are required to display 10-bit images.
Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF.
* Optional calibration kit is required.
Hardware pivot function for fast drawing in portrait on landscape orientation
User-selectable display configurations
Luminance/gamma settings are selectable from three preset levels according to the needs. User-selectable configurations enable stress free operations without specialized settings.
OSD Information Display
With a push of a button, the display’s current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.
LED indicator to inform of current status
A glance at the LED indicator tells you the display’s current operating status.
Display Quality Control
The Medivisor Series is a series of software to collectively support display quality control from acceptance and periodic constancy testing to constant monitoring, to calibration.
Ecological Technology – Considering the Global Environment
Totoku is committed to providing high performance display systems that are ecological and environmentally friendly. We strive to create green IT initiatives and be a part of building a clean energy future. In order to achieve this, we have incorporated new power-saving features in our i2 series displays.
Our advanced power saving function dims the backlight as the screensaver activates, thereby reducing power consumption and preventing unnecessary backlight deterioration, resulting in a longer lasting display. Our internal power supply system includes a newly improved power save mode, which allows the display to enter standby mode with less than 2 watts of energy consumption.
*Optional software Calibration Kit is required to set up the Advanced Power Savings feature.
Enhanced convenience with utility software:
Advanced power saving*
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.
18 points of luminance values are measured and plotted into a graph.
*Optional software Calibration Kit is required to set up the Advanced Power Savings feature and Gamma check feature.
Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.
|Model Name||MS23i2 /AR (Special AR Coating), MS23i2 /F (Protective Filter)|
|LCD Panel||Technology||21.3-inch, Monochrome|
|Display Area||432mm x 324mm|
|Pixel Pitch||0.270mm x 0.270mm|
|Contrast Ratio||700:1 (typ)|
|Maximum Luminance||1800cd/m² (typ), (calibrated to 410cd/m² by factory default)|
|Viewing Angle||170° horizontal and vertical (typ)|
|Visual Performance||Available Resolution||4800 (1600 X 3) sub-pixels X 1200 pixels|
|Grayscale||256 shades of gray out of 12241 shades of gray.
1024 shades of gray (DisplayPort 10bit input)
Simultaneous display of 2048 shades of gray
|Input Signal||Input Sync Signal||DVI-D (DVI 1.0 compliant)
DisplayPort (DisplayPort 1.1a compliant)
|Plug and Play||DDC2B compliant|
|Input Power Supply||Input||100V ~ 240V (±10%) 50/60Hz, Built-in AC power supply|
|Maximum Power Consumption||85W typ. (with power management feature)|
|Features||Calibration Control||Luminance, Gamma, Capability of saving 3 sets of LUT settings
(An optional calibration kit is required.)
|OSD Information Display||Model name, Serial No., Total operating time, Calibration settings (Operating
time from Last Calibration, Luminance, Gamma, etc.), Current luminance, Ambient brightness, etc.
|USB Hub||USB Rev. 2.0 compliant, Self-powered
USB upstream connector (x1), USB downstream connector (x2)
|Other Features||Luminance Uniformity Correction, Hardware Pivot, LED indicator,
Configurations switching function
|Standards||UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B,
RoHS, FDA510(k), ( CCC: pending )
|Physical Characteristics||Dimensions (WxHxD)||Landscape : 474.5 (W) X 479.9 / 541.4 (H) X 220 (D)mm
Portrait : 390 (W) X 522.2 / 583.7 (H) X 220 (D)mm
|Weight||Net: approx. 12kg, Without tiltstand: approx. 7.8kg|
|Tilt Stand||Tilt, Swivel, Portrait / Landscape|
|Mount||100mm VESA compliant|
|Security Slot||On the back of the panel and the tilt stand|
|Accessories||Power cord (3P), DVI cable, USB cable, Operation manual
*Cleaning kit (Special AR coating model only)
Single Head Barco Nio 2MP LED High-Bright Color – MDNC-2221Read more
Nio Color 2MP LED is a 2 MegaPixel color display system with LED backlights, providing excellent image quality for confident diagnoses. Nio Color 2MP LED provides an effective display solution for a multitude of applications and modalities, including 3D PACS, 3D echo, ultrasound, orthopedic imaging, CAD, image fusion, nuclear medicine and PET.
Call for Best Price!
EIZO RadiForce 2MP 20.1” – G21-DH-MMP2PRead more
EIZO RadiForce 2MP 20.1″ LCD Monochrome Radiology Monitor, 1200X1600, Digital/Analog dual input, 700cd/m2, Viewing Angle H:170/V:170, Contrast Ratio 1000:1, 30 ms Response Time, Height Adjustable Stand, Certifications UL2601, FCC-A, FDA510K, KIT INCLUDES 2 G21-BK and 1 MED2MP-PCI Video Card
Ships in 1-14 days
NEW! Single Head 3MP EIZO 21.3” Radiforce MonochromeRead more
3 megapixel high-resolution diagnostic monochrome radiology monitor ideal for displaying an entire chest CR image. High-definition and multifunctional model featuring precise calibration compliant with the DICOM Part 14 standard.
Environmentally-Friendly LED Backlight
Call for Best Price!
Dual Head 3MP Totoku 21.3″ LED Display – MS35i2-DH-K2000DRead more
Super High Resolution Display for Mammography.
As imaging technology advances, modality devices are reproducing such high resolution that even current 3MP displays are unable to reproduce, creating a bottleneck in softcopy diagnostic environment. TOTOKU introduces “MS35i2″ equipped with Independent Sub pixel Drive technology to accept higher resolution output from modality devices as a major breakthrough.
Free Barco White Paper
Receive special pricing from the top medical display companies along with white papers and software updates: Learn More.
Sign up for our monthly Newsletter