Call (866) 369 -1902
Single Head 3MP Totoku 20.8 – MS33i2-SH-Quadro 2000DT
Digital mammography viewing demands an extraordinarily high level of precision from your LCD display. Totoku’s MS33i2 redefines new standards of care by over-delivering resolution and clarity for improved accuracy in breast cancer screening.
MASTER DISTRIBUTOR
24X7 SUPPORT
COMPETITIVE PRICING
SAME DAY SHIPPING
VALUABLE CONSULTATION
Special AR Coating for Film-like Black and Improved Sharpness
TOTOKU’s new special AR coating technology addresses properties of focus, noise reduction, contrast, and viewing angle achieving film-like black and accurate reproduction of images. (Patent pending)
λ-Sentinel II Luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.
Simultaneous display of 1276 shades of gray Simultaneous display of 2048 shades of gray
Combined with a viewer software, 2048 shades of grapy (11 bit) can be simultaneously displayed. It realizes smoother grayscale display required for medical image displays.
*A viewer software that supports TOTOKU’s multi-shade display system is required for 2048 shades of gray simultaneous display.
*1276 shades of gray are simultaneously displayable by the Independent Sub pixel Drive technology.
Remote grayscale check and remote calibration functions Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
* Optional PM Medivisor software is required.
Luminance equalizer λ-Uniformity Congruence) Next Generation Interface – DisplayPort
In addition to a DVI port, each i2 series display includes a new digital display interface, “DisplayPort”. When using the DisplayPort, up to 1024 or 10-bit shades of gray are simultaneously displayed. This enables smooth and accurate display of subtle di erences in shades of gray. Additionally, 1073.74million colors (10-bit in each R, G, B) are simultaneously displayed on our color model.
*Customized viewer software and graphics card are required to display 10-bit images.
Luminance equalizer λ-Uniformity Congruence) Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
* Images shown are for illustrative purposes only.
Calibration function
Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF.
* Optional calibration kit is required.
Hardware pivot function for fast drawing in portrait on landscape orientation
Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait.
Details
Display Configrations User-selectable display con figurations
Luminance/gamma settings are selectable from three preset levels according to the needs. User-selectable con figurations enable stress free operations without specialized settings.
OSD Information Display OSD Information Display
With a push of a button, the display’s current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.
LED indicator to inform of current statusLED indicator to inform of current status
A glance at the LED indicator tells you the display’s current operating status.
LED indicator to inform of current statusDisplay Quality Control
The Medivisor Series is a series of software to collectively support display quality control from acceptance and periodic constancy testing to constant monitoring, to calibration.
Ecological Technology ? Considering the Global Environment
Ecological Technology EConsidering the Global Environment
Totoku is committed to providing high performance display systems that are ecological and environmentally friendly. We strive to create green IT initiatives and be a part of building a clean energy future. In e ort to achieve this, we have incorporated new power-saving features in our i2 series displays.
Our advanced power saving function dims the backlight as the screensaver activates, thereby reducing power consumption and preventing unnecessary backlight deterioration, resulting in a longer lasting display. Our internal power supply system includes a newly improved power save mode, which allows the display to enter standby mode with less than 2 watts of energy consumption.
*Optional software Calibration Kit is required to set up the Advanced Power Savings feature.
Enhanced convenience with utility software:
Advanced power saving*
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.
Gamma check
18 points of luminance values are measured and plotted into a graph.
*Optional software Calibration Kit is required to set up the Advanced Power Savings feature and Gamma check feature.
Pairing service to match colors of two displays (Optional)
Worldwide medical safety standards
This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment.
Specification
| Model Name | MS33i2 |
|
|---|---|---|
| LCD Panel | Technology | 20.8-inch, Monochrome |
| Display Area | 423.9mm x 318.0mm | |
| Pixel Pitch | 0.207mm x 0.207mm | |
| Contrast Ratio | 900:1 (typ) | |
| Maximum Luminance | 1000cd/m² (typ), (calibrated to 500cd/m² and 410cd/² by factory default) | |
| Viewing Angle | 170° horizontal and vertical (typ) | |
| Visual Performance | Available Resolution | 1536 X 2048 |
| Grayscale | 256 shades of gray out of 12241 shades of gray. 1024 shades of gray (DisplayPort input) Simultaneous display of 2048 shades of gray |
|
| Input Signal | Input Sync |
DVI-D (DVI 1.0 compliant) DisplayPort (DisplayPort 1.1a compliant) |
| Plug and Play | DDC2B compliant | |
| Input Power Supply | Input | 100V ~ 240V (±10%) 50/60Hz, Built-in AC power supply |
| Maximum Power Consumption | 85W typ. (with power management feature) | |
| Features | Calibration Control | Luminance, Gamma, Capability of saving 3 sets of LUT settings (An optional calibration kit is required.) |
| OSD Information Display | Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, Ambient brightness, etc. |
|
| USB Hub | USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2) |
|
| Other Features | Luminance Uniformity Correction, Hardware Pivot, LED indicator, Configurations switching function |
|
| Standards | UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B, RoHS, CCC,FDA510(k) |
|
| Physical Characteristics | Dimensions (WxHxD) | Landscape : 474 (W) X 471.4 / 532.9 (H) X 220 (D)mm Portrait : 367 (W) X 524.9 / 586.4 (H) X 220 (D)mm |
| Weight | Net: approx. 12kg, Without tiltstand: approx. 7.8kg | |
| Tilt Stand | Tilt, Swivel, Portrait / Landscape | |
| Mount | 100mm VESA compliant | |
| Security Slot | On the back of the panel and the tilt stand | |
| Accessories | Power cord (3P), DVI cable, USB cable, Operation manual *Cleaning kit (Special AR coating model only) |
|
Calibration kit
Calibration Kit – Model CAL-012 . American College of Radiology guidelines still recommends the periodic use of a calibration kit to insure that diagnostic integrity is maintained over the life of the monitor. Some states now require the use and documentation of a calibration kit. Do not confuse this device with the front sensors on most diagnostic medical displays. They are not the same.
What You Get
What You Get:
Single Head Totoku MS33i2 with one 3MP Hi-Brite Monochrome LCD radiology display and one (1) matching nVidia Quadro 2000D video card. Display port and DVI inputs. Contrast Ratio 900:1 (typ); Maximum Luminance 1000cd/m² (typ), (calibrated to 500cd/m² and 410cd/² by factory default); Viewing Angle is 170° horizontal and vertical (typ). 5 year warranty.
Featured products
-
Read moreLG 21.3″ 3MP Color Diagnostic Display – 21HK512D
The LG 21HK512D is a 21.3-inch 3MP IPS display with 1000 nits brightness facilitates precise diagnoses of medical images from CT and Angiography by presenting exceptional quality and accuracy.
Stable Color and Grayscale Images
The standard DICOM Part 14 Gamma allows for accurate diagnostics as it adjusts the color and grayscale levels of medical images received from different types of image capturing devices. Plus, 18-bit LUT also makes enhanced, accurate color and grayscale image, smoothing out the transition between LUT values.
Promo Pricing! Call for details
-
Read moreJVC/Totoku 1.3MP 19 – ME195
The JVC/Totoku ME195 LED backlight system provides more stability in images as well as energy saving. Compared to the conventional CCFL backlight models, ME195 saves about 20% energy and will hold brightness much longer. Additionally, mercury-free LED backlight contributes to reduce the environmental impacts.
Luminance Stabilizing System
Built-in luminance sensor consistently monitors and accurately stabilizes luminance on the screen to optimize image quality all the time.
Overstock Pricing! Call for details
-
Sale!
Add to cart3MP JVC 21.3” Color LED Display – CLS300
$3,495.00JVC CLS-300 (CLS300) is an optimal solution where doctors need to view both grayscale and color images, and effectively covers multiple applications like PACS, CAD, PET and nuclear medicine.
Clearly Defined Diagnostic Images
The new i3 color series render more precise color and monochrome modality images. One of its unique technologies the built-in self-calibrating sensor ensures that the monitor constantly performs at its best.
-
Read moreRadiNet Network QC Management Software for Medical Imaging Displays – RadiNet
Manages 400 Monitors
RadiNET can manage up to 400 monitors connected to 50 client PCs, ranging from the monitors for diagnostic imaging in the reading and modality rooms to HIS/RIS monitors handling reference images and electronic diagnostic chart monitors in clinics.
