- Best Sellers
- 12 MP
- Featured Items
- Mega Pixel
- Viewing Area
- Radiology Displays
- Surgical Displays
- Color Medical Monitors
- Monochrome Medical Monitors
- BARCO Monitors
- EIZO Monitors
- JVC Monitors
- LG Monitors
- NEC Monitors
- Optik View Monitors
- TOTOKU Monitors
- PACS Workstations
- Patient Monitor LCDs
- CRT Replacements
- Ultrasound Machines
- Previous Products
NEW! Single Head 5MP Barco Coronis Grayscale - MDCG-5221 / K9602708
TOTOKU Monochrome and Color Calibration Kit - CAL-012
NEW! Barco Coronis Uniti 12MP Diagnostic Display with MXRT-8700 Video Card - MDMC-12133 / K9602990
8MP LG Clinical Review Monitor (Black Bezel) - 27HJ713CB
Dual Head Barco 5MP Diagnostic Display without Video Card- MDNG-5221 / K9602736
Single Head 4MP EIZO Radiforce 29.8” Color – RX440-SH-NM200
The high resolution of 4 megapixels gives this color monitor the same screen size and number of pixels as two 2 megapixel monitors in portrait mode but without the obtrusive bezels.
Dual-Screen Display on One Monitor
With Picture-by-Picture (PbyP) or Picture-in-Picture (PinP) functions, two screens from separate input signals can be displayed simultaneously on one monitor. A bezel-less widescreen enables simplified and flexible operation.
Call for Replacement Option
Color and Monochrome Images with Separate Gamma Curves
EIZO’s unique Hybrid Gamma function distinguishes whether the images being displayed are monochrome or color and displays each image in optimum brightness and grayscale tones. This expands the usability of PACS applications constantly attaining sufficiency with mix of color and monochrome medical images.
Accuracy in distinguishing between grayscale and color images may depend on how they are aligned. Viewer software compatibility verification is required.
Presence Sensor for Power Savings
The presence sensor feature unites convenience with savings by ensuring that the monitor conserves power when it is not in use. The presence sensor prompts the monitor to switch to power save mode when it detects the user is away from the monitor, and then resume normal operation when the user returns.
The monitor can support 10-bit input for each RGB color, displaying more than one billion colors simultaneously. This ensures accurate reproduction of color tones for 3D color rendering and image fusion.
10-bit color graphics board and 10-bit color viewer software needed for 10-bit color display.
Mode Selection for Optimum Viewing
Selectable with the front panel buttons, the CAL Switch function allows for various imaging modes of different modalities such as CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function.
Versatile Positioning for Improved Operability
EIZO’s highly versatile stand offers tilt, swivel and a wide height adjustment range enabling you to use the monitor with greater comfort.
Customer Assurance with Medical Standards
Meets the strictest medical, safety, and EMC emission standards.
Environmentally-Friendly LED Backlight
By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL backlights, LED backlights deteriorate more slowly and thus the monitor offers a longer service life. Since the LED backlight is mercury free, it will reduce any potential impact on the environment when it is disposed of.
Diagnostic Precision with DICOM Part 14 Factory Adjustment
To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tones on the production line to produce a monitor compliant with DICOM Part 14.
Consistency with DICOM Part 14 Calibration
With the bundled RadiCS LE quality control software, a simplified calibration compliant with the DICOM Part 14 standard can be performed to correct the brightness and grayscale tones of the monitor ensuring the most accurate and consistent shadings possible over time.
Easy Calibration with Integrated Front Sensor
An Integrated Front Sensor (IFS) housed within the front bezel measures brightness and grayscale tones and calibrates to the DICOM Part 14 standard. Without having to connect and disconnect, an IFS performs QC tasks and does not interfere with the viewing area. This dramatically cuts monitor quality control workload and maintenance costs.
Brightness Uniformity for a Steadier Image Across the Screen
The Digital Uniformity Equalizer (DUE) function provides optimum brightness uniformity which is difficult to attain due to the characteristics of LCD monitors.
Quick Brightness Stabilization for Instant Viewing
At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.
Wide Viewing Angles for Multiple People Use
Wide Viewing angles with minimal color shift when viewed from the side.
Brightness Stability Within Usage Time Guaranteed
EIZO’s confidence in its product quality extends to brightness stability which is also covered during the usage time specified in the warranty.
Warranty with Safety and Trust
|Type||Color TFT LCD Panel|
|Size||76 cm / 29.8″ (756 mm diagonal)|
|Native Resolution||2560 x 1600 (16:10 aspect ratio)|
|Display Size (H x V)||641.2 x 400.8 mm|
|Pixel Pitch||0.2505 x 0.2505 mm|
|Display Colors||10-bit colors (DisplayPort) : 1.07 billion (maximum) colors
8-bit colors: 16.77 million from a palette of 68 billion colors
|Viewing Angles (H / V, typical)||176° / 176°|
|Brightness (typical)||750 cd/m2|
|Recommended Brightness for Calibration||400 cd/m2|
|Contrast Ratio (typical)||1100:1|
|Response Time (typical)||20 ms (On/Off)|
|Input Terminals||DVI-D (dual link) x 1, DVI-D (single link) x 1, DisplayPort x 1|
|Digital Scanning Frequency (H / V)||31 – 159 kHz / 29 – 61 Hz (VGA Text: 69 – 71 Hz)
Frame synchronous mode: 59 – 61 Hz, 29.5 – 30.5 Hz
|Function||1 upstream, 2 downstream|
|Power Requirements||AC 100 – 120 V, 200 – 240 V: 50 / 60 Hz|
|Maximum Power Consumption||167 W|
|Typical Power Consumption||84 W|
|Power Save Mode||Less than 0.7 W|
|Power Management||DVI DMPM, DisplayPort 1.1a|
|Sensor||Backlight Sensor, Integrated Front Sensor, Presence Sensor, Ambient Light Sensor|
|Features & Functions|
|Digital Uniformity Equalizer||Yes|
|Preset Modes||CAL Switch|
|OSD Languages||English, German, French, Italian, Japanese, Simplified Chinese, Spanish, Swedish, Traditional Chinese|
|Net Weight||20.2 kg|
|Net Weight (Without Stand)||16.0 kg|
|Hole Spacing (VESA Standard)||200 x 100 mm and 100 x 100 mm|
|Certifications & Standards (Please contact the EIZO group company or distributor in your country for the latest information.)||CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, IEC60601-1, VCCI-B, FCC-B, Canadian ICES-003-B, C-tick, RoHS, China RoHS, WEEE, CCC, GOST-R|
|FDA 510(k) Clearance||Yes (for General Radiography)|
|Supplied Accessories||AC power cord, dual link signal cable (DVI-D – DVI-D), signal cable (DisplayPort – DisplayPort), USB cable, Utility Disk (RadiCS LE, ScreenManager Pro for Medical)|
Please note that you must be a registered user to download RadiForce relevant files. If you have not registered, please continue on to our registration page. If you have forgotten your User ID or Password, please send us an e-mail.
|RX440 User’s manual||English||2.9 MB|
|RX440 Setup manual||English
EIZO Quality Control supports Macintosh Computers!
What You Get
Barco MXRT-5600 – 3D PCIe 3 Head Display Controller – MXRT-5600 / K9306043Read more
BARCO MXRT5600 – The high performance MXRT5600 allows you to drive three monitors with just one PCIe slot. As such, the board is the perfect match for PACS workstations combining two diagnostic displays with a third monitor for patient lists or 3D viewing applications.
- 3 display outputs
- PCIe 3.0 compliant
- 2 GB GDDR5 display memory
- Single-wide form factor
- DisplayPort (DP) 1.2 and DVI-I video outputs
- Powered by AMD’s scalable FirePro workstation GPU
Call For Price
BARCO Handheld LCD Photometer Sensor – B4100035
$599.00Add to cart
Barco Handheld LCD Photometer Sensor
The Barco LCD sensor is an industry-leading colorimeter featuring Barco-specific calibration technology. Allowing seamless integration with MediCal QAWeb – our unique online service for automated calibration, Quality Assurance, and asset management – this colorimeter offers the best value for money.
NEW! Barco 24” Clinical Review Display MDRC-2324 SNIB – K9350055$649.00Add to cart
Barco MDRC-2324 SNIB 24” Clinical Review Display. Features high-quality LCD panel, 10-bit DICOM LUT, front consistency sensor, QAWeb, adjustable stand, internal power supply, black bezel.
This 24” Barco Eonis® MDRC-2324 SNIB Clinical Review Display has been built with healthcare specialists in mind. It combines consistent, high image quality and an attractive, versatile design with networked quality assurance.
High image quality
RadiNetPro Network Centralized QC Management Software for Medical Imaging Displays – RadiNet ProRead more
Centralized Management of all Monitors in a Hospital
RadiNET Pro features a monitor management server, which is installed in the hospital to enable centralized management via a network from client PC monitors installed with RadiCS software. Unified management of all monitors in a hospital covers everything from history reference operations such as calibration to acceptance and constancy testing, changing settings and other QC operations.
Manages up to 8,000 Monitors
Free Barco White Paper
Receive special pricing from the top medical display companies along with white papers and software updates: Learn More.
Sign up for our monthly Newsletter